|
Participation in the CCIL Certification Programs requires that each laboratory implement a quality system that involves an internal audit program. A series of checklists are provided to assist in the auditing of test procedures.
- LS200 Penetration
of Bituminous Materials
- LS261 Preparation
of Marshall Specimens
- LS262 Bulk
Relative Density of Bituminous Materials
- LS263 Resistance
to Plastic Flow of Bituminous Mixtures
- LS264 Theoretical
Maximum Relative Density of Bituminous Mixtures
- LS265 Percent
Air Voids in Compacted Dense Bituminous Pavement Mixtures
- LS266 Determination
of V.M.A. in Compacted Bituminous Materials
- LS282 Quantitative
Extraction of Asphalt Cement and Analysis of Extracted Aggregates
- LS284 Recovery
of Asphalt Cement from Solution by Abson or Rotovapor
- LS292 Asphalt
Cement Content by Ignition & Analysis of Remaining Aggregate from
Bituminous Pavement Mixtures
- R28 Accelerated Aging of Asphalt Binder
Using Pressure Aging Vessel (PAV)
- R30 Mixture
Conditioning of Hot-Mix Asphalt (HMA)
- T240 Effect of Heat and Air on a Moving
Film of Asphalt (RTFOT)
- T283 Resistance of Compacted
Asphalt Mixtures to Moisture-Induced Damage
- T312 Preparing and
Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means
of the Superpave Gyratory Compactor
- T313 Flexural Creep Stiffness of Asphalt
Binder Using the Bending Beam Rheometer (BBR)
- T315 Rheological Properties of Asphalt
Binder Using a Dynamic Shear Rheometer (DSR)
- T316 Vistosity Determination of Asphalt
Binder using Rotational Viscometer (RV)
November 9 2011
|
